
Wall-mounted battery
AU51120
A 6.14 kWh wall-mounted battery rated IP65, so it can go on an inside wall or under a covered outdoor wall. It talks to hybrid inverters over CAN, RS485 or RS232, and up to 15 units can run in parallel.
6.14 kWhrated capacity
51.2 V · 120 Ahnominal
IP65indoor or outdoor
15units in parallel
Highlights
Why installers choose AU51120
Indoor or outdoor
IP65 enclosure for walls inside the home or in a sheltered outdoor spot.
Optional heating
Intelligent heating is available as an option for cold climates.
Built-in breaker
A breaker on the unit for safe installation and service.
Inverter communication
CAN, RS485 and RS232 for common 48 V hybrid inverters.
Specifications
AU51120 technical data
| Specification | AU51120 |
|---|---|
| Basic information | |
| Rated capacity | 6.144 kWh |
| Nominal capacity | 120 Ah |
| Rated voltage | 51.2 V |
| Operating voltage range | 44–58.4 V |
| Cycle life | 6,000 cycles (80% DoD) |
| Communication | CAN / RS485 / RS232 |
| Max. units in parallel | 15 |
| Protection | Over-charge, over-discharge, over-current, short-circuit, low-voltage and temperature protection |
| Charging | |
| Charging power | 3.74 kW |
| Recommended charging current | 75 A |
| Max. charging current | 100 A |
| Recommended charging voltage | 58 V |
| Max. charging voltage | 58.4 V |
| Discharging | |
| Discharging power | 3.5 kW |
| Recommended discharging current | 70 A |
| Max. discharging current | 100 A |
| Discharge cut-off voltage | 44 V |
| Battery recovery voltage | 48 V |
| General | |
| Size (H × W × D) | 600 × 480 × 200 mm |
| Net weight | 66 kg |
| Breaker | Yes |
| Installation | Wall-mounted |
| Intelligent heating | Optional |
| Ingress protection | IP65 |
| Cell type | LiFePO4 |
| Operating altitude | Below 2,000 m |
| Temperature | |
| Discharging temperature | -20 to 60 °C |
| Charging temperature | 0 to 55 °C |
| Storage temperature | -20 to 45 °C |
| Certification | |
| Documents | MSDS · UN38.3 |
Data from the 2026 product catalogue. Specifications may change; we confirm the current datasheet with every quotation.


